The acoustic KTV with some particularity, for example room is small, easy cause screaming, next to a room one, sound insulation, and because it is night, consider the whole field sound isolation effects of leakage. Therefore, must consider good acoustics design.
(1) to partition wall with heavy interference source level loudly

Hall, VIP rooms and between rooms and to make between acoustic processing, the general recommended the hollow bricks to build cement perfusion sound insulation wall.

(2) partition to cement bricks on top of smallpox

Many people to save cost and convenient by the first partition, after the condole top to reserve air conditioner, exhaust pipes and pipe and the power wire fire in this way, the piping construction, not only in the ceiling is arduous after, and pipe sound insulation wall of reinforcement and the top seal brings a lot of trouble. The reasonable construction scheme is pipeline construction, and then build walls, first, then sealed wall ceiling.
(3) sound reasonable design to the proportion of metope

Many people know that in some deep-pocketed silencing metope can reduce the design of screaming, but sometimes too much emphasis on sound-absorbing effect, it will cause the microphone, sound reverberation that affect the overall dry, singing effect. Because of this, the room also should have certain sound reflection, such as design of horniness floor, metope USES log jigsaw design, can solve the shortage of proportion reverb.

(4) smallpox ceiling design

General recommended in dealing with concise, the strength of the skeleton condole top, especially under the situation with good speaker hanging position of strength, and well marked by plasterboard, top, using gypsum moulding module, using light wooden TCTV geometry substrate. This can cooperate with the three colors, light supplement lights.

(5) handle all doors and Windows of sound insulation
The rubber sealing strip glass best condition, can consider to use double glass. The door of each room will make sound insulation, general use multilayer board manufacturing, external package sound-absorbing material, reoccupy leathery material apply face, and add.

(6) speakers can reduce the reasonable layout, mutual interference
A common design is near two rooms speakers hang by the design, as well as reduce back-to-back after touching metope speakers, backplane wiring and convenient, 2 will also supply can reduce the noise interference.

(7) handle pipeline section of crosstalk and interference
Air duct and exhaust pipes of interference especially, must deal with solid strength of piping installation area, at the same time, should consider the sealing parts contact.